RADIUS configuration mode
【Example】
！Configure RADIUS client IP address to be 192.168.0.100
QTECH(config-aaa-radius-red)#client-ip 192.168.0.100
！Remove RADIUS client IP address
QTECH(config-aaa-radius-red)#no client-ip
【Related command】
radius host
8.2.2 primary-ip
Use this command to configure primary IP address, authentication port and
accounting port of current RADIUS server. Use the no command to remove the
primary IP address.
primary-ip server-ip authentication-port accounting-port
no primary-ip
【Parameter】
8-12
To Next Page
Loading...
