packetsize：The length of message sending, with the unit of second
timeout：the time of waiting for replying after message is sent，with the unit of
second
host：Host ip address
【Command configuration mode】
Any configuration mode
【Usage】
Use this command to test whether the facility in the same net is connected or not.
【Example】
！The ip address of current switch is 192.168.0.100. Test the connection of switch
with the ip address of 192.168.0.200
QTECH#ping 192.168.0.200
12.4.16 show broadcast-suppression
Use show broadcast-suppression command to display the number of the broadcast
12-41
To Next Page
Loading...
