QTech QSW-2900 - Igmp-Snooping Query-Interval Seconds

【Parameter】
vlanID：ID of existed vlan （between 1～4094）
【Command configuration mode】
Any configuration mode
【Example】
！Configure querier sending query to vlan 10
QTECH(config)# igmp-snooping querier-vlan 10
4.2.19 igmp-snooping query-interval seconds
Configure interval of sending IGMP query. It is defaulted to be 60s.
igmp-snooping query-interval
seconds
no igmp-snooping query-interval
【Command configuration mode】
Any configuration mode
4-23