description description-list
no description
【Parameter】
description-list：Port description string ranges from 1 to 32 characters
【Command configuration mode】
Interface configuration mode
【Example】
！Configure description string “red” for the Ethernet 0/0/3
QTECH(config-if-ethernet-0/0/3)#description red
！Clear description of Ethernet 0/0/3
QTECH(config-if-ethernet-0/0/3)#no description
【Related command】
show description
2.1.3 duplex
Use duplex command to configure the duplex mode of the current port. Use no
2-4
To Next Page
Loading...
