QTech QSW-2900

VLAN will become VLAN 1 after using the no vlan command. If the VLAN to be
removed exists in the multicast group, remove the related multicast group first.
【Example】
！Enter VLAN 1 configuration view
QTECH(config)#vlan 1
3.2 GVRP Configuration Command
GVRP command includes:
 gvrp
 show gvrp
 show gvrp interface
3.2.1 gvrp
Use the gvrp command to enable GVRP globally in global configuration mode or
a port in Ethernet port configuration mode. Use no gvrp command to disable
GVRP globally in global configuration mode or a port in Ethernet port
configuration mode.
gvrp
3-7