QTECH(config)#show time-range name tm1
!Display statistic information of all time range:
QTECH(config)#show time-range statistic
5.1.16 time-range
Use time-range command to enter time-range configuration mode. Use no
time-range command to delete configured time range.
time-range time-range-name
no time-range { all | name time-range-name }
【Parameter】
time-range-name：the name of time range with initial English letters (that is
[a-z,A-Z]) with any kind which is in the range of 1 to 32 characters.
【Command configuration mode】
Global configuration mode
【Example】
！Create time range tm1 and enter it.
5-75
To Next Page
Loading...
Need help?
General
