access-list 200 : 1 rules
access-list 202 : 2 rules
access-list 210 : 1 rules
total config rules : 10 rules
5.1.13 show access-list runtime
Use show access-list runtime command to display runtime application
information of ACL.
show access-list runtime { all | access-list-number | name access-list-name }
【Parameter】
all means all ACL (including the one with number ID and name ID)
access-list-number
means the number of ACL to be displayed which is a number
in the range of 1～399
name
access-list-name
character string parameter with initial English letters (that
is [a-z,A-Z]) with any kind, excluding space and quotation mark; all、any are not
allowed.
5-70
To Next Page
Loading...
