QTech QSW-2900 - Lacp Port-Priority

【Parameter】
priority： Range from 1 to 65535
【Default】
default priority is 32768
【Command configuration mode】
Global configuration mode
【Example】
！Configure LACP system priority is 40000
QTECH(config)#lacp system-priority 40000
2.4.5 lacp port-priority
Use lacp port-priority command to configure lacp port-priority. When the port
backup exists, the inferior one backups. Use no lacp port-priority command to
restore default lacp port-priority.
lacp port-priority priority
【Parameter】
2-40