QTech QSW-2900 - Show Access-List Config

QTECH(config-timerange-wendafternoon)#periodic weekend 14:00 to
18:00
QTECH(config-timerange-wendafternoon)#exit
5.1.11 show access-list config
Use show access-list config command display detaol configuration of ACL.
show access-list config { all | access-list-number | name access-list-name }
【Parameter】
all means all ACL (including the one with number ID and name ID)
access-list-number means the number of ACL to be displayed which is a number
in the range of 1～399
name
access-list-name character string parameter with initial English letters (that
is [a-z,A-Z]) with any kind, excluding space and quotation mark; all、any are not
allowed.
【Command configuration mode】
Any configuration mode
5-67