【Example】
！Configure queue-scheduler to be weighted round robin, and 4 weights to be 1，
3， 6， 9
QTECH(config)#queue-scheduler wrr 1 3 6 9
6.1.2 queue-scheduler cos-map
Use queue-scheduler cos-map command to configure 4 queue numbers and
cos-map to 8 packed-priority of IEEE802.1p.
queue-scheduler cos-map [ queue-number ] [ packed-priority ]
【Parameter】
queue-number：Range from 0 to 3
packed-priority：The priority defined by IEEE 802.1p ranges from 0 to 7
【Default】
The default mapping is the mapping defined by 802.1p：
802.1p: 0 1 2 3 4 5 6 7
6-3
To Next Page
Loading...
