xxx：Means the name of the module. … means other modules are omitted.
【Command configuration mode】
Any configuration mode
【Usage】
Use keyword “level-list” to display the specified level information in list. If the
“level-list” is not specified, the information of the higher level (The smaller the
level number is, the higher the level is.) and the equal level will be displayed.
【Example】
！Display the buffered log of level 7
QTECH(config)#show logging buffered level-list 7
10.1.3 show logging flash
Use show logging flash command to display flash log.
show logging flash [ level | level-list { level [ to level ] } &<1-8> ] [ module { xxx | … }
* ]
【Parameter】
10-3
To Next Page
Loading...
