QTECH(config)#loopback external
12.4.8 vct run
Use vct run command to port vct test. Vct test for all the ports in global
configuration mode. Vct test for current port in interface configuration mode.
vct run
【Command configuration mode】
Global configuration mode, interface configuration mode
【Example】
！Vct run for all ports
QTECH(config)#vct run
12.4.9 vct auto-run
Use vct auto-run command to enable vct auto-run globally or on a port. Use no
vct auto-run command to disable vct auto-run globally or on a port.
vct auto-run
no vct auto-run
12-34
To Next Page
Loading...
