QTECH(config)#sntp server 192.168.0.100
9.1.13 sntp trusted-key
Use sntp trusted-key command to configure a trusted-key.
sntp trusted-key number
no sntp trusted-key number
【Parameter】
number：Key ID ranges from 1 to 4294967295
【Default】
All key number is reliable
【Usage】
In broadcast and multicast, the authentication is valid only when key-number is
configured. The authentication is invalid when receiving the message encrypt by
untrusty-key.
【Command configuration mode】
Global configuration mode
9-16
To Next Page
