QTech QSW-2900

Use igmp-snooping command to enable IGMP snooping. Use no IGMP-snooping
command to disable IGMP snooping.
igmp-snooping
no igmp-snooping
【Default】
IGMP snooping disable
【Command configuration mode】
Global configuration mode
【Example】
！Enable IGMP snooping
QTECH (config)#igmp-snooping
4.2.3 igmp-snooping host-aging-time
Use igmp-snooping host-aging-time command to configure the host-aging-time of
dynamic multicast group learnt by igmp-snooping. Use no igmp-snooping
host-aging-time command to restore the default host-aging-time.
4-8