QTech QSW-2900 - VLAN Configuration

Chapter 3 VLAN Configuration Command
3.1 VLAN Configuration
VLAN(Virtual Local Area Network) configuration includes:
 description
 show vlan
 switchport
 vlan
3.1.1 description
Use description command to assign a description string to the current VLAN. Use
no description command to delete the description of the current VLAN.
description string
no description
【Parameter】
string：It is in the range of 1 to 32 characters to describe the current VLAN. The
characters can be printable, excluding such wildcards as
'/'、':'、'*'、'?'、'\\'、'<'、'>'、
'|'、'"'
etc.
3-1