【Example】
！Remove user with username of aaa@qtech.com
QTECH(config)#dot1x user cut username aaa@qtech.com
8.3.11 show dot1x
Use show dot1x command to display 802.1x authentication information, such as:
802.1x authentication is enable or not, which authentication is used.
show dot1x
【Command configuration mode】
Any configuration mode
【Usage】
Use show command to display related information before configuration.
【Example】
！Display 802.1x authentication information
QTECH(config)#show dot1x
8-37
To Next Page
Loading...
