packed-priority： 0 0 1 1 2 2 3 3
【Command configuration mode】
Global configuration mode
【Usage】
There are 4 default packed-priorities from 0 to 3. 3 is superlative. The superlative
data in the buffer is preferential to send.
【Example】
！Configure packed-priority 1 to mapped priority 6 of IEEE 802.1p
QTECH(config)#queue-scheduler cos-map 1 6
6.1.3 show queue-scheduler
Use show queue-scheduler command to display the mode and the parameter of
queue-scheduler.
show queue-scheduler
【Command configuration mode】
6-4
To Next Page
Loading...
