sntp client authentication-key command configures it reliable or to be the key of
unicast and anycast.
【Command configuration mode】
Global configuration mode
【Example】
！Configure SNTP client MD5 authentication-key, with the key ID being 12，and
the key being abc
QTECH(config)#sntp client authentication-key 12 md5 abc
9.1.5 sntp client broadcastdelay
Use sntp client broadcastdelay command to configure the transmission delay of
the SNTP client in broadcast or multicast. Use no sntp client broadcastdelay
command to restore default transmission delay.
sntp client broadcastdelay milliseconds
no sntp client broadcastdelay
【Parameter】
9-5
To Next Page
Loading...
