【Example】
！Enable current terminal information displaying
QTECH(config)#terminal monitor
10.1.11 logging buffered
Use logging buffered command to enable buffered logging and configure filter
regulations. Use no logging buffered command to disable buffered logging and
restore to default filter regulations.
logging buffered
no logging buffered
logging buffered { level | none | level-list { level [ to level ] } &<1-8> } [ module
{ xxx | … } * ]
no logging buffered filter
【Parameter】
level：Level of information ranges from 0 to 7
none：Any level is not allowed.
xxx：Means the name of the module. … means other modules are omitted.
10-12
To Next Page
Loading...
