【Default】
All buffered logging enable.
Filter regulations of all terminals are to allow all modules of levels 0 to 6 to output
information
【Command configuration mode】
Global configuration mode
【Usage】
Use keyword “level-list” to display the specified level information in list. If the
“level-list” is not specified, the information of the higher level (The smaller the
level number is, the higher the level is.) and the equal level will be displayed.
【Example】
！Disable buffered logging
QTECH(config)#no logging buffered
！Configure filter regulations of all terminals to allow all module of level 0,1,2 and 6
10-13
To Next Page
