QTech QSW-2900 - Show Time-Range

QTECH(config)#show access-list runtime statistic
access-list 1 access-list 200 : 1 rules
access-list 2 : 2 rules
access-list 202 : 2 rules
access-list 10 access-list 210 : 1 rules
access-list 11 access-list 210 : 1 rules
access-list 12 access-list 210 : 1 rules
total runtime rules : 8 rules
5.1.15 show time-range
Use show time-range command to display time range.
show time-range [ all | statistic | name time-range-name ]
【Parameter】
all：all time range
statistic：all statistics information of all time range.
5-73