7.1.11 spanning-tree transit-limit
Use spanning-tree transit-limit command to configure the maximum number of
configuration BPDUs the current port can transmit in each Hello time.
spanning-tree transit-limit max-bpdus
no spanning-tree transit-limit
【Parameter】
max-bpdus：the number of BPDU ranges from 1 to 255。
【Default】
3
【Command configuration mode】
Interface configuration mode
【Example】
！Configure the maximum number of configuration BPDUs that can be transmitted
by the Ethernet 0/7 in each Hello time to 5
QTECH(config-if-ethernet-0/7)#spanning-tree transit-limit 5
7-14
To Next Page
Loading...
