QTech QSW-2900 - Igmp-Snooping Max-Response-Time

igmp-snooping host-aging-time seconds
no igmp-snooping host-aging-time
【Command configuration mode】
Global configuration mode
【Parameter】
seconds：range from 10 to 1000000 seconds
【Example】
！Configure host-aging-time of the dynamic multicast group learnt by
igmp-snooping to be 10 seconds
QTECH(config)#igmp-snooping host-aging-time 10
4.2.4 igmp-snooping max-response-time
When receiving a leave message, igmp-snooping will wait for some time to see
whether to remove interface of igmp-snooping multicast group. The time is the
response time.
igmp-snooping max-reponse-time seconds
no igmp-snooping max-reponse-time
4-9