【Parameter】
username：existed username ranges from 1 to 32 printable characters such
wildcards as '/'、':'、'*'、'?'、'\\'、'<'、'>'、'|'、'"'.
【Command configuration mode】
Any configuration mode
【Example】
！Display the privilege of user “red”
QTECH(config)#show username red
1.1.13 stop
Use stop command to stop the session between user and telnet forcibly, that is,
after using this command, telnet user with the username of “username” will force
to disconnect with telnet.
stop username
【Parameter】
username：Telnet user who has logged in
1-12
To Next Page
Loading...
