Config ACL subitem successfully!
QTECH(config-std-nacl-example)#
5.1.10 periodic
Use periodic command to create periodic time range. Use no periodic command
to delete periodic time range.
periodic days-of-the-week hh:mm:ss to [ day-of-the-week ] hh:mm:ss
no periodic days-of-the-week hh:mm:ss to [ day-of-the-week ] hh:mm:ss
【Parameter】
days-of-the-week：means this time period will be effected in the day of the week
or will be effected from the day of week. More than one parameter can be
input at one time. The range of this parameter is as following:
0～6（number which means from Monday to Sunday）；
mon，tue，wed，thur，fri，sat，sun（special character string which means Monday
to Sunday）；
weekdays（special character string which means weekday from Monday to
5-63
To Next Page
Loading...
Need help?
General
