【Example】
！Configure the igmp-snooping group-limit to be 99
QTECH(config-if-ethernet-0/1)#igmp-snooping group-limit 99
4.2.7 igmp-snooping permit/deny group
Use igmp-snooping permit/deny group command to configure the permit and
deny group, and the learning regulations of the group which is not permit or deny
group (We call it default group).
igmp-snooping permit/deny group [ all | group-address]
no igmp-snooping permit/deny group [group-address]
【Command configuration mode】
Interface configuration mode for permit/deny group
Global configuration mode for the learning regulations of default group
【Parameter】
group-address：Multicast MAC address is in the form of 01:00:5e:01:02:03
【Example】
4-12
To Next Page
Loading...
Need help?
General
