show utilization interface
2.1.1 clear interface
Use clear interface command to clear the information of the interface.
clear interface [ interface-num | slot-num ]
【Parameter】
interface-num：Means Ethernet port. Interface-num is in the form of interface-type
+ interface-number. Interface-type is Ethernet and interface-number is
slot-num/port-num, in which slot-num is in the range of 0 to 2, and port-num is in
the range of 1 to 24.
slot-num：Means slot number which is in the form of ethernet + slot-num, and
ranges from 0 to 2
【Command configuration mode】
Global configuration mode, interface configuration mode
【Usage】
2-2
To Next Page
