QTech QSW-2900

QTECH(config)#login-access-list telnet 192.168.0.100 0.0.0.0
QTECH(config)#no login-access-list telnet 0.0.0.0 255.255.255.255
12.6.2 show login-access-list
Use show login-access-list command to display all ip address allowed by web,
snmp, telnet management system.
show login-access-list
【Command configuration mode】
Any configuration mode
【Example】
！Display all ip address allowed by web, snmp, telnet management system
QTECH(config)#show login-access-list
12.7 CPU Alarm Configuration Command
CPU alarm configuration command includes:
 alarm cpu
 alarm cpu threshold
12-80