no login-access-list { snmp | telnet | web } ip-address
wildcard
【Parameter】
ip-address：IP address，0.0.0.0 means any ip address is allowed to manage system
except 127.*.*.*
wildcard means mask wildcard which is in the form of mask in reverse. 0 means
mask this bit, and 1 ,eams does not mask this bit. When mask in reserve is 0.0.0.0,
it means host address, and 255.255.255.255 means all host.
【Command configuration mode】
Global cofiguration mode
【Usage】
Remove ip address 0.0.0.0 so that the configuration can be successful.
【Example】
！Configure ip address allowed by telnet management system to be 192.168.0.100
12-79
To Next Page
Loading...
