interfaces with the same type can be linked by to keyword, but the port number to
the right of the to keyword must be larger than the one to the left of the keyword,
and this argument only can be repeated for up to 3 times.
【Command configuration mode】
Any configuration mode
【Usage】
Interface-list keyword is optional. If this keyword unspecified, the command
displays GVRP information for all the Ethernet ports. If specified, the command
displays GVRP information on specified Ethernet port.
【Example】
！Display GVRP information on Ethernet port 3, 25, 26
QTECH(config)#show gvrp interface ethernet 0/0/3 ethernet 0/0/5 ethernet 0/0/6
3.2.4 garp permit vlan
Use garp permit vlan command to add configured static vlan to GVRP module for
3-10
To Next Page
Loading...
