send requirement message and overtime retransmission.
【Example】
！Configure overtime retransmission to be twice
QTECH(config)#sntp client retransmit 2
9.1.10 sntp client retransmit-interval
Use sntp client retransmit-interval command to configure retransmit-interval of
SNTP client in unicast and anycast operation mode.
sntp client retransmit-interval seconds
no sntp client retransmit-interval
【Parameter】
seconds：Retransmit-interval ranges from 1 to 30 seconds
【Default】
5 seconds
【Command configuration mode】
9-12
To Next Page
Loading...
Need help?
General
