message, if the username goes without the domain name. After the default
domain name is enabling, switch will add @ and default domain name to a
username wothout a domain name to authenticate. To configure a default domain
which must be existed, or the configuration fails.
【Example】
！Configure default domain name to be red.com and enable the default domain
QTECH(config-aaa)#default domain-name enable red.com
！Disable default domain name
QTECH(config-aaa)#default domain-name disable
【Related command】
domain
8.1.4 domain
Use domain command to enter AAA configuration mode. If it doesn’t exist, create
it. Use no domain command to remove the domain.
domain domain-name
8-5
To Next Page
Loading...
