QTech QSW-2900

Global configuration mode
【Example】
！Configure the switch to operation in STP-compatible mode
QTECH(config)#spanning-tree mode stp
7.1.14 spanning-tree remote-loop-detect
Use spanning-tree remote-loop-detect command to enable remote loop detect.
Use no spanning-tree remote-loop-detect command to disable remote loop
detect.
spanning-tree remote-loop-detect
no spanning-tree remote-loop-detect
【Command configuration mode】
Global configuration mode and interface configuration mode
【Usage】
Batch processthe interface in global configuration mode needed keyword.
【Example】
7-17