QTech QSW-2900 - STP Configuration Command

Chapter 7 STP Configuration Command
7.1 STP Configuration Command
STP（Spanning Tree protocol）configuration command includes:
 show spanning-tree interface
 spanning-tree
 spanning-tree cost
 spanning-tree forward-time
 spanning-tree hello-time
 spanning-tree max-age
 spanning-tree port-priority
 spanning-tree mcheck
 spanning-tree point-to-point
 spanning-tree portfast
 spanning-tree transmit
 spanning-tree priority
 spanning-tree mode
 clear spanning-tree
7.1.1 show spanning-tree interface
Use show spanning-tree interface command to display the information of current
STP protocol.
7-1