Use mac-address-table learning mode command to modify ways of MAC address
learning. Ways of MAC address learning includes: SVL and IVL. SVL is shared
VLAN learning; and IVL is independent VLAN learning. The default one is SVL.
This command cannot add to configuration files.
mac-address-table learning mode { svl | ivl }
show mac-address-table learning mode
【Command configuration mode】
Global configuration mode
【Example】
！Modify MAC address to be IVL
QTECH(config)#mac-address-table learning mode ivl
12.4.15 ping
Use ping command to check the network connection.
ping [ -c count ] [ -s packetsize ] [ -t timeout ] host
【Parameter】
count：The number of message sending.
12-40
To Next Page
Loading...
