QTech QSW-2900 - Show Cpu; Show Dlf-Forward

2001/01/01 00:00:00 CCT 8:00
【Related command】
clock set
12.4.18 show cpu
Use show cpu command to display cpu use rate. The smaller the rate is, the busier
the CPU is.
show cpu
【Command configuration mode】
Any configuration mode
【Example】
！Display CPU busy rate
QTECH(config)#show cpu
12.4.19 show dlf-forward
Use show dlf-forward command to display configuration of message transmitting to
unknown destination.
12-43