【Default】
Ingress filtering enables.
【Command configuration mode】
Interface configuration mode
【Usage】
When interface ingress filtering enables, the frame with the VLAN ID being
different from the VLAN ID of the interface which the frame is received will be
dropped; when interface ingress filtering disables, the frame will not be dropped.
【Example】
！Enable the ingress filtering of ethernet 0/0/5
QTECH(config-if-ethernet-0/0/5)#ingress filtering
！Disable the ingress filtering of ethernet 0/0/5
QTECH(config-if-ethernet-0/0/5)#no ingress filtering
2.1.7 priority
2-9
To Next Page
Loading...
