QTECH(config)#sntp client authenticate
9.1.4 sntp client authentication-key
Use sntp client authentication-key command to configure MD5 authentication-key.
More than one authentication-key can be configured.
sntp client authentication-key number md5 value
no sntp client authentication-key number
【Parameter】
number：Authentication-key ID ranges from 1to 4294967295
value：Authentication-key of 16 characters at most, which can be numbers, letters,
space and other symbols.
【Default】
No authentication-key
【Usage】
Use sntp client authentication-key command to configure MD5 authentication-key.
If the configuration is successful, the authentication-key should be effective after
9-4
To Next Page
Loading...
