QTech QSW-2900 - Mac-Address-Table Age-Time

ethernet 0/1 vlan 1
12.4.12 mac-address-table age-time
Use mac-address-table age-time command to configure MAC address aging time.
Use no mac-address age-time command to restore it to default time.
mac-address-table age-time [ agetime | disable ]
no mac-address age-time
【Parameter】
agetime：Means MAC address aging time which ranges from 1 to 1048575
seconds
disable：Means MAC address not aging.
【Default】
Default MAC address aging time is 300 seconds
【Command configuration mode】
Global configuration mode
【Example】
12-38