！Configure hostname to be SWITCH-A
QTECH(config)#hostname SWITCH-A
SWITCH-A (config)#
1.1.8 interface
Use interface command to enter interface configuration mode.
interface ethernet interface-num
【Parameter】
interface-num：The number of the interface
【Command configuration mode】
Global configuration mode
【Usage】
Interface-number is in the form of slot-num/port-num, in which slot-num is in the
range of 0 to 2, and port-num is in the range of 1 to 24.
【Example】
！Enter from clobal configuration mode to interface configuration mode
1-8
To Next Page
