QTech QSW-2900 - Show Igmp-Snooping; Igmp-Snooping Route-Port Vlan Vlanid Interface Interface-List

4.2.13 show igmp-snooping
Use show igmp-snooping command to display the information of IGMP snooping
show igmp-snooping
【Command configuration mode】
Any configuration mode
【Example】
！Display IGMP snooping information
QTECH(config)#show igmp-snooping
4.2.14 igmp-snooping route-port vlan vlanID interface interface-list
Added route port demonstrates the transferred port of leave or report packet of
the host in the same multicast.
igmp-snooping route-port vlan
vlanID interface port-number
no igmp-snooping route-port vlan vlanID interface port-number
【Parameter】
4-18