QTech QSW-2900 - Show Gmrp; Show Gmrp Interface

！Enable igmp-snooping route-port forward
QTECH(config)#igmp-snooping route-port forward
4.2.9 show gmrp
Use show gmrp command to display GMRP globally.
show gmrp
【Command configuration mode】
Any configuration mode
【Example】
！Display GMRP information globally
QTECH(config)#show gmrp
GMRP state : enable
4.2.10 show gmrp interface
Use show gmrp interface command to display GMRP information of an interface.
show gmrp interface [ interface-list ]
【Parameter】
4-14