Chapter 6 QOS Configuration Command
6.1 QoS Configuration Command
QoS configuration command includes:
queue-scheduler
queue-scheduler cos-map
show queue-scheduler
show queue-scheduler cos-map
6.1.1 queue-scheduler
Use queue-scheduler command to configure queue-scheduler mode and
parameter. Use no queue-scheduler command to disable queue-scheduler.
queue-scheduler { sp-wrr queue1-weight queue2-weight queue3-weight | wrr
queue1-weight queue2-weight queue3-weight queue4-weight }
no queue-scheduler
【Parameter】
sp-wrr
queue1-weight queue2-weight queue3-weight
：means the strict priority and
weighted round robin.
Queue4
is strict-priority, others are weighted round robin,
and their default weight are: 20、30、50. queue1-weight：means the weight of the
6-1
To Next Page
Loading...
