level number is, the higher the level is.) and the equal level will be displayed.
【Example】
！Add a new logging host with the ip address of 1.1.1.1
QTECH(config)#logging 1.1.1.1
！Enable logging host 1.1.1.1
QTECH(config)#logging host 1.1.1.1
！Configure filter regulations of logging host 1.1.1.1 to allow all module of level 0 to
6 to output information
QTECH(config)#logging host 1.1.1.1 6
10.1.16 logging facility
Use logging facility command to configure logging facility used by logging host.
Use no logging facility command to restore the default logging facility.
logging facility { xxx | … } *
no logging facility
【Parameter】
10-19
To Next Page
Loading...
Need help?
General
