ip-address：IP address of Syslog server
level：Level of information ranges from 0 to 7
none：Any level is not allowed.
xxx：Means the name of the module. … means other modules are omitted.
【Default】
All logging host enable.
Filter regulations of all terminals are to allow all modules of levels 0 to 6 to output
information
【Command configuration mode】
Global configuration mode
【Usage】
At most 15 logging hosts are allowed to configure.
Use keyword “level-list” to display the specified level information in list. If the
“level-list” is not specified, the information of the higher level (The smaller the
10-18
To Next Page
Loading...
