Non
【Example】
！enable Cross-VLAN multicast
QTECH(config)#cross-vlan multicast
4.3.2 cross-vlan multicast
Use this command to configure tag/untag attribution of interface transmitting
multicast and vlan id of tagged interface.
cross-vlan multicast [tag vlan vlanid| untag]
【Parameter】
tag/untag：configure tag/untag attribution of interface transmitting multicast which
has nothing to do with 802.1Q configuration
vlan-id：configure vlan id of tagged interface which has nothing to do with 802.1Q
configuration
【Command configuration mode】
4-26
To Next Page
Loading...
