QTECH(config-if-ethernet-0/0/3)#priority 1
2.1.8 show description
Use show description command to display interface description.
show description interface [ interface-list ]
【Parameter】
interface-list：List of interfaces means many Ethernet ports
【Command configuration mode】
Any configuration mode
【Usage】
When displaying interface description, if interface-list is not specified, description
of all interfaces is displayed. If interface is specified, the description of the
specified interface is displayed.
【Example】
！Display description of Ethernet 0/0/3
2-11
To Next Page
Loading...
Need help?
General
