milliseconds：This keyword ranges from 1 to 9999
【Default】
3 milliseconds
【Command configuration mode】
Global configuration mode
【Usage】
Transmission delay is necessary because client cannot time transmission delay
and local time compensation in broadcast and multicast.
【Example】
！Configure broadcastdelay to be 1 second
QTECH(config)#sntp client broadcastdelay 1000
9.1.6 sntp client mode
Use sntp client mode command to configure the operation mode of SNTP client.
Use no sntp client mode command to restore the default operation mode of SNTP
9-6
To Next Page
Loading...
