QTech QSW-2900

client.
sntp client mode { unicast | broadcast | multicast | anycast [ key number ] }
no sntp client mode
【Parameter】
unicast：Unicast mode
broadcast：Broadcast mode
multicast：Multicast mode
anycast：Anycast mode
number: ID of anycast ranges from 0 to 4294967295，0 means unauthentication.
【Default】
Broadcast mode
【Usage】
Use sntp client mode command to configure the operation mode of SNTP client.
Only when SNTP client enables, this command is effective.
9-7