QTech QSW-2900 - Igmp-Snooping Querier-Vlan Vlanid

igmp-snooping query-max-respon second
no igmp-snooping query-max-respon
【Command configuration mode】
Any configuration mode
【Parameter】
Seconds：1－255 which is used for max response time of IGMP query packet.
【Example】
！Configure the max response after receiving query to be 150
QTECH(config)# igmp-snooping query-max-respon 150
4.2.18 igmp-snooping querier-vlan vlanID
Configure vlan which IGMP query sent by querier to be sent to. It is defaulted to
be vlan 1.
igmp-snooping querier-vlan
vlanID
no igmp-snooping querier-vlan
4-22